Dt. Indiana Jones Fan Forum



#1 18.05.2020, 07:48
Pascal Abwesend
Moderator

Avatar von Pascal

Beiträge: 8.595
Dabei seit: 04.03.2012
Wohnort: <Info auf Anfrage>

Betreff: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Im Replica Prop Forum läuft zur Zeit eine (so finde ich) interessante Aktion. https://www.therpf.com/...st.290275/

Zitat von peter_74:
Hi guys!

Today I'm here to show you the prop that was in my mind the day after I saw "Indiana Jones and the Kingdom of the Crystal Skull". When I saw the movie for the first time, I thought: "I want to make it!" As you know, there were other skull replicas made during the past years. I always dreamed to have a crystal skull but in my mind I always imaginated it made in my way. Last year I talked with a good friend Michele of mine and I said him my wish to sculpt my own crystal skull. He supported me. I said him that I had not so much time to sculpt because I work 8 hours per day so I would't have had the time to sculpt a so big and difficult prop. His reply was really simple and smart: "work hard 30 minutes per day and in a year or so I am sure that you'll do your crystal skull" So, I did it! (Naturally I spent more than 30 minutes per day and my wife was not so happy so, at least, I hope you like my creation )

What you see in the images is my personal sculpting that took me 2 months of movie frames analysis plus a carefully examination of images of the official prop plus the replicas ones. Then I started my sculpting day by day and after about a year this is the result.

[...]

Zitat von "peter74, post: 4458443, member: 26663":
Crystal Skull 1:1 Scale Limited Edition

YouTube https://www.youtube.com/watch?v=0DxAQ1gSZS4


- The replica will be chrystal clear, hollow inside, with special opalescent stuff in it to give a luminescent fx, detachable jaw fixed in place thanks to neodimio magnets.

- Limited Edition of 40/45 skulls only (no more runs will be made)

- Ready to ship in about 3/4 months

The price will be reduced basing it on the number of sales:

$890.00 if the interest list will be between 15 to 20

$860.00 if the interest list will be between 20 to 25

$840.00 if the interest list will be between 25 to 35

$800.00 if the interest list will be between 35 to 40

We ask a deposit of $250.00 (non refundable)

Payment Plan info

We understand that this is not an inexpensive purchase. To help make it more affordable we prepared the following payment plan, so you can choose:

1) Pay a deposit of $250.00 (non refundable) and the rest of amount when ready to ship the skull.
or
2) Pay a deposit of $250.00 (non refundable) and, for those who will require, the rest of the amount will be divided in number two payments payable in two months.

(Prices are in US Dollars)

Shipping costs (we ship by ups fast delivery service):

To Europe $34.00
To USA $59.00

For other countries please contact me for an exact quote.

LIST
1. MaverickFerg (RPF) - confirmed
2. MCINTOSH275 (RPF)
3. Pascal Kurosawa (RPF)
4. rnrlifestyle (RPF) - confirmed
5. batmann539 (RPF)
6. DEDE02 (RPF) - confirmed
7. Joe310blk (RPF)
8. glotis (RPF)
9 ) Nasedo (RPF)
10. MF5H (RPF)
11. Blastmaster (RPF)
12. vincbud (RPF)
13. JDKesler RPF)
14. el peón (RPF)
15. knibs7 (COW)
16. IJJTM (COW)
17. Scout91 (RPF) - confirmed
18. dri68 (RPF)
19. CreamPye (RPF) - confirmed
20. Rogermaximus (RPF)
21. Indyriv {COW)
22. C0mmand3rC0dy (RPF)
23. imposollector (RPF) - confirmed
24. T-Bone1138 (COW)
25. Bloodmike1 (RPF) - confirmed
26. Shpider (RPF)
27. Warrenhouck (RPF) - confirmed
28. doriang (Rpf)



Miniaturansichten angehängter Bilder:
skull13.jpg
Dateityp: Dateityp-Informationen zu: jpg jpg
Downloads: 174
Dateigröße: 35,88 KB
Bildgröße: 600 x 800 Pixel
skull211.jpg
Dateityp: Dateityp-Informationen zu: jpg jpg
Downloads: 198
Dateigröße: 24,70 KB
Bildgröße: 800 x 610 Pixel
skull6.jpg
Dateityp: Dateityp-Informationen zu: jpg jpg
Downloads: 182
Dateigröße: 23,05 KB
Bildgröße: 800 x 600 Pixel
skull33.jpg
Dateityp: Dateityp-Informationen zu: jpg jpg
Downloads: 171
Dateigröße: 20,74 KB
Bildgröße: 600 x 800 Pixel
skull43.jpg
Dateityp: Dateityp-Informationen zu: jpg jpg
Downloads: 173
Dateigröße: 26,96 KB
Bildgröße: 612 x 800 Pixel


Laird Dr. Pascal Ivanović Kurosawa is one of the most over-rated moderators in this forum.
aktuell page of diary in work: sign.10,page11 (No. 155 of 288)
Dieser Beitrag wurde 5 mal editiert, das letzte Mal am 18.05.2020, 08:03 von Pascal.  

#2 18.05.2020, 16:22
IndyfanBO Abwesend
Mitglied

Avatar von IndyfanBO

Beiträge: 2.180
Dabei seit: 16.01.2006
Wohnort: -

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Hm... Ist der Schädel tatsächlich 1:1? Der kommt mir etwas kleiner vor... Ich hab den Original Schädel natürlich jetzt nicht genau vor augen und ist auch schon lange her, dass ich Indy 4 gesehen habe...
Dieser Beitrag wurde 1 mal editiert, das letzte Mal am 18.05.2020, 16:42 von IndyfanBO.  

#3 18.05.2020, 16:26
treasurelane Abwesend
Mitglied

Beiträge: 2.463
Dabei seit: 21.03.2016
Wohnort: Deutschland

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
War spontan auch mein Gedanke. Liegt es vielleicht auch daran, dass der Prototyp nicht transparent ist?
Dieser Beitrag wurde 1 mal editiert, das letzte Mal am 18.05.2020, 16:30 von treasurelane.  

#4 18.05.2020, 16:46
IndyfanBO Abwesend
Mitglied

Avatar von IndyfanBO

Beiträge: 2.180
Dabei seit: 16.01.2006
Wohnort: -

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Das mag natürlich sein... Ist ja jetzt nicht so, als wüssten die nicht was sie tun... Aber im video sah er jetzt tatsächlich kleiner aus... Haben die vielleicht im Film auch unterschiedliche benutzt? Zu meiner Schande muss ich gestehen, dass ich mich da jetzt nicht durch die Making Ofs und durch endlose Prop Bilder hindurch gearbeitet habe...
 

#5 18.05.2020, 18:58
Valeska Abwesend
Mitglied

Avatar von Valeska

Beiträge: 1.189
Dabei seit: 23.04.2010
Wohnort: Niedersachsen und Nordhessen

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
mmmhhh. ja sieht zu klein aus : Screenshot KOTCS
2nd
3rd
4th
5th
HG
Dieser Beitrag wurde 1 mal editiert, das letzte Mal am 18.05.2020, 19:02 von Valeska.  

#6 18.05.2020, 20:13
IndyfanBO Abwesend
Mitglied

Avatar von IndyfanBO

Beiträge: 2.180
Dabei seit: 16.01.2006
Wohnort: -

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Das wäre natürlich schade, wenn es schon einen Run gibt und dann ist der eigentlich viel kleiner als der Film Skull...
 

#7 18.05.2020, 22:19
Pascal Abwesend
Moderator

Avatar von Pascal

Beiträge: 8.595
Dabei seit: 04.03.2012
Wohnort: <Info auf Anfrage>

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Zitat von rnrlifestyle (theRPF):
What are the final dimensions of this? I know they used a different size in the throne room (bigger) whereas the prop that was carried around was 40 cm long.

Zitat von michelle (theRPF):
Ours is exactly 38,89 cm in lenght

Michelle ist 1,90 m und H. Ford 1,85 m groß.

Miniaturansichten angehängter Bilder:
IMG_20200518_212751_klein.jpg
Dateityp: Dateityp-Informationen zu: jpg jpg
Downloads: 184
Dateigröße: 641,58 KB
Bildgröße: 1092 x 1340 Pixel
190_gross.jpg
Dateityp: Dateityp-Informationen zu: jpg jpg
Downloads: 178
Dateigröße: 362,08 KB
Bildgröße: 854 x 808 Pixel


Laird Dr. Pascal Ivanović Kurosawa is one of the most over-rated moderators in this forum.
aktuell page of diary in work: sign.10,page11 (No. 155 of 288)
Dieser Beitrag wurde 6 mal editiert, das letzte Mal am 21.05.2020, 14:50 von Pascal.  

#8 19.05.2020, 06:36
pielandreas Abwesend
Mitglied

Avatar von pielandreas

Beiträge: 845
Dabei seit: 25.01.2012
Wohnort: bei Hannover

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Ich hab auch einen, ist schon länger in der Sammlung



http://www.thx-trailer.com/.../Skull.htm
Andreas
Dieser Beitrag wurde 1 mal editiert, das letzte Mal am 19.05.2020, 06:38 von pielandreas.  

#9 19.05.2020, 07:03
Pascal Abwesend
Moderator

Avatar von Pascal

Beiträge: 8.595
Dabei seit: 04.03.2012
Wohnort: <Info auf Anfrage>

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Zitat von pielandreas (www.thx-trailer.com):
Crystal Skull - Replica [...] Der Schädel hat eine Länge von ca. 40cm.

Also für mich passen damit die 38,89 cm vom Peter74-Schädel, wenn man die "Reiseversion" des Schädels sucht.
Laird Dr. Pascal Ivanović Kurosawa is one of the most over-rated moderators in this forum.
aktuell page of diary in work: sign.10,page11 (No. 155 of 288)
Dieser Beitrag wurde 4 mal editiert, das letzte Mal am 21.05.2020, 14:48 von Pascal.  

#10 19.05.2020, 19:31
IndyfanBO Abwesend
Mitglied

Avatar von IndyfanBO

Beiträge: 2.180
Dabei seit: 16.01.2006
Wohnort: -

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Auf dem zweiten bild sieht das natürlich schon wieder deutlich anders aus. Kann man anhand der Bilder wirklich schlecht einschätzen...
 

#11 07.11.2022, 16:38
Fabilousfab Abwesend
Moderator

Avatar von Fabilousfab

Beiträge: 2.632
Dabei seit: 11.01.2020
Wohnort: Merching

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Es wird gerade einer auf Kleinanzeigen zum Verkauf angeboten.
Fabian
Nichts schockiert mich, ich bin Wissenschaftler
 

#12 07.11.2022, 19:09
Kukulcan Abwesend
Mitglied

Avatar von Kukulcan

Beiträge: 7.593
Dabei seit: 04.03.2013
Wohnort: Köln

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Guck mal, aus sowas könnteste dir 3 Schädel schnitzen:
https://shop-welt-der-kristalle.de/...gskristall
 

#13 07.11.2022, 19:17
Fabilousfab Abwesend
Moderator

Avatar von Fabilousfab

Beiträge: 2.632
Dabei seit: 11.01.2020
Wohnort: Merching

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Zitat von Kukulcan:
Guck mal, aus sowas könnteste dir 3 Schädel schnitzen:
https://shop-welt-der-kristalle.de/...gskristall

…und schleifen. Danach seh ich aber aus wie ein Schneemann mit 3 Bandscheibenvorfällen. Preislich gehts ja…fast 😂😂😂

So cool das wirklich wäre, ist es einfach nicht realistisch.
Fabian
Nichts schockiert mich, ich bin Wissenschaftler
 

#14 08.11.2022, 13:06
Gerd Brunwald Abwesend
Mitglied

Avatar von Gerd Brunwald

Beiträge: 398
Dabei seit: 15.06.2021
Wohnort: RLP Mosel

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Bergkristall zu bearbeiten ist nicht so einfach. Ich wohne in der Nähe von Idar-Oberstein wo gerüchtehalber die echten Kristallschädel mehr oder weniger als Gag hergestellt wurden.
Das war aber erst möglich als die entsprechenden Werkzeuge mit Diamantsplitterbeschichtung und Antrieben mit ausreichend hoher Drehzahl im 19.Jahrhundert zur Verfügung standen.
Bergkristall wurde seit hunderten von Jahren auch dort im Hunsrück gefunden aber weil er als unbearbeitbar galt bis auf besondere Stücke tatsächlich weggeworfen.
Ich selbst habe da in den uralten Abraumhalden, bei der " Nachlese", ehemals entsorgte Tennisball große Bergkristalldrusen gefunden.
 

#15 08.11.2022, 14:19
Indy2Go Abwesend
Mitglied

Avatar von Indy2Go

Beiträge: 5.858
Dabei seit: 16.01.2011
Wohnort: Xanadu

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Über den Mitchell-Hedges-Schädel sagt man ja, dass das händische Polieren über 1500 Jahre gedauert hätte.
Marc S.
Bismarck biss Marc, bis Marc Bismarck biss.
 

#16 08.11.2022, 14:33
Kukulcan Abwesend
Mitglied

Avatar von Kukulcan

Beiträge: 7.593
Dabei seit: 04.03.2013
Wohnort: Köln

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Zitat von Indy2Go:
Über den Mitchell-Hedges-Schädel sagt man ja, dass das händische Polieren über 1500 Jahre gedauert hätte.

Dafür hat man doch heute CNC Fräsen
 

#17 08.11.2022, 14:41
Indy2Go Abwesend
Mitglied

Avatar von Indy2Go

Beiträge: 5.858
Dabei seit: 16.01.2011
Wohnort: Xanadu

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Zitat von Kukulcan:
Zitat von Indy2Go:
Über den Mitchell-Hedges-Schädel sagt man ja, dass das händische Polieren über 1500 Jahre gedauert hätte.

Dafür hat man doch heute CNC Fräsen

Nein, ist unmöglich. Selbst mit heutiger Technik - der Kristall würde splittern!

Zwinkernder Smiley
Marc S.
Bismarck biss Marc, bis Marc Bismarck biss.
 

#18 08.11.2022, 14:50
FloW Abwesend
Mitglied

Avatar von FloW

Beiträge: 4.282
Dabei seit: 01.08.2006
Wohnort: Rheinhessen

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
„Er ist nicht von dieser Welt!“ 👽

Kann sein. Muss aber nicht. Shrek hatte auch ein reales Wesen als Vorbild. Ich bin fest davon überzeugt das es im Universum weiteres intelligentes Leben gibt. Seelen ohne physischen Körper sind auch möglich. Das klingt abgespaced, aber nichts ist unmöglich. Zwinkernder Smiley
Dieser Beitrag wurde 1 mal editiert, das letzte Mal am 08.11.2022, 14:53 von FloW.  

#19 08.11.2022, 16:03
Pascal Abwesend
Moderator

Avatar von Pascal

Beiträge: 8.595
Dabei seit: 04.03.2012
Wohnort: <Info auf Anfrage>

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Zitat von Indy2Go:
Über den Mitchell-Hedges-Schädel sagt man ja, dass das händische Polieren über 1500 Jahre gedauert hätte.

Sagen kann man viel, wenn der Tag lang ist. Da klingt für mich "Made in Idar-Oberstein mit Diamantwerkzeug" weitaus realistischer (wenn dafür leider auch weniger aufregend).
Laird Dr. Pascal Ivanović Kurosawa is one of the most over-rated moderators in this forum.
aktuell page of diary in work: sign.10,page11 (No. 155 of 288)
Dieser Beitrag wurde 2 mal editiert, das letzte Mal am 08.11.2022, 16:07 von Pascal.  

#20 08.11.2022, 16:19
Indy2Go Abwesend
Mitglied

Avatar von Indy2Go

Beiträge: 5.858
Dabei seit: 16.01.2011
Wohnort: Xanadu

Betreff: Re: Prop Run "Crystal Skull 1:1 Scale" von Peter74
Das ist ja auch das Argument, weshalb der Mitchell-Hedges-Schädel eben nicht aus der Prä-Maya-Zeit stammen kann.
Marc S.
Bismarck biss Marc, bis Marc Bismarck biss.
 

Seiten (2): 1, 2


Alle Zeitangaben in GMT +01:00. Aktuelle Uhrzeit: 10:31.